![background image](http://html1.mh-extra.com/html/triax/tsr-1000/tsr-1000_user-manual_1160917003.webp)
Locating:
Slots and openings in the cabinet are provided for ventilation to
protect it from overheating. Do not block these openings or allow them to be
blocked by placing the STB on a bed, sofa or other similar surface, nor should it
be placed over a radiator or heat register.
Power-Cord Protection:
Place the power-supply cord out of the way, where it
will not be walked on. Please take special attentions to cords at plugs,
convenience rece ptacles and the point where they exit from the unit.
Object and Liquid Entry:
Never put objects of any kind into this STB through
openings, as they may touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill any liquid on the STB.
Note:
Moisture may be formed inside the unit in the following conditions:
¾
When the unit is suddenly moved from a cold environment or an
air-condition room to a warm place.
¾
Immediately after a heater has been turned on.
¾
In a steamy or very humid room.
If the moisture forms inside the unit, it may not operate properly. To correct this
problem, turn on the power and wait about two hours for the moisture to
evaporate.
Parts Replacement:
When the unit parts need to be replaced, user should
make sure the service technician use the replacement parts specified by the
manufacturer or having the same characteristics as the original part.
Unauthorized replacement may put the unit in the risk of fire, electric shock or
other hazards.
Safety Check:
After all the maintenances and repairs are done, user is
required to request the service technician to conduct the overall safety check
to ensure the mach-
ine is in the proper condition.