![background image](http://html1.mh-extra.com/html/triax/tsc-114/tsc-114_operating-manual_1160916009.webp)
9
Quick Guide
Before turning on the power
Initial auto installation
When the Receiver is powered on for the first time, the
Initial Installation
screen appears.
Follow the on-screen instructions to search for all available channels.
Confirm the following before turning on the power
•
Are the Terrestrial and Satellite cables connected?
•
Is the power adapter connected and plugged in?
•
Is the HDMI cable connected between the receiver and your TV?
1
Ensure the aerial and satellite cables are connected before switching on.
2
Press the enter key on the Receiver or Remote Control.
•
The Initial Installation screen is displayed.
3
Highlight Start Search, and press ENTER to start the channel search.
•
The Receiver will search for, sort and store all Terrestrial channels according to their LCN numbers.
NOTE
•
After the Initial Installation has been completed,
the default PIN is automatically set to ‘0000’.
To change the PIN setting, refer to Page 25.
1
3
2
4
1
Connect the antenna (Coaxial Plug), 75ohm coaxial
cable, (CAI Benchmarked cable such as Triax TX100)
2
Connect the satellite dish (F-Type Plug), 75ohm coaxial cable,
(CAI Benchmarked cable such as Triax TX100)
3
Connect the HDMI cable
4
Connect the power adaptor and switch on at the socket
Summary of Contents for TSC 114
Page 52: ...52 Issue 1...