Triax TSC 114, Operating Manual

Page: 10 / 52

10
Connect the Aerial to RF IN, Satellite to LNB IN
and connect the External Power Supply to the
DC Input. Connect the HDMI or SCART output
to the TV.
Initial Power Up - Power On/Off
When in “Standby” mode, press the Standby
button on the remote control to switch on the
receiver. Pressing the button again will put the
receiver back in to “standby” mode.
Initial Installation - Exited Prior to
Channel Search
If the initial installation screen is EXITED before
storing channels the receiver will have an empty
database, see picture below. To store channels
either perform a reset or access the Installation
Menu.
The initial installation screen shows several basic
set-up parameters.
Watching TV
Getting Started
The user can select the OSD Language, Country,
Time Zone, Active Antenna and LCN from this
menu.
Press “Start Search” to search channels.
Volume Adjustment and Mute
Press “Vol +/-” to adjust the volume when the
system is in normal play mode; A volume bar is
displayed
Press “Mute” to disable the sound, pressing
“Mute” again will enable the sound.
Changing Channels
Press “CH+/-” to switch to the previous or next
programme in the channel list.
Alternatively press the number keys to input the
programme number directly.