Step 4
Connect the BNC connector on the other end of the power and video cable
to a Video In port on the back of the DVR via pre-made BNC to BNC power
cables or TX5912 installation cabling.
Repeat Steps 1 through 4 for all cameras before
continuing.
Step 5
Plug the power adapter into a surge protector*
You should only use the power supply
included with the camera.
A single camera can be connected directly to a monitor or TV using the
included cable and adapter.
Connect the camera to the cable and power supply as described in
Steps1,2 and 5 above before connecting it to your video display.
Depending on your TV or monitor, you may need to use the included BNC-to-
RCA adapter(below) to connect the yellow plug on the camera cable to your
screen
Connecting to a TV or Monitor
Summary of Contents for TBF 796W
Page 7: ......
