VERY IMPORTANT INFORMATION & TIPS
Do NOT connect the receiver to the mains supply until HDMI & Sat leads are connected:
Warranty will be void if installed without good ventilation. Network cabinets do not count as good ventilation.
If you connect to an existing dish and have no pictures you may have a 11300 LNB please refer to front of this
guide on how to change this.
After a factory default of the SHD990 you may have to scan for channels again and put the channels in your
prefered order or scan for changes.
www.triaxnz.co.nz
Recording basics.
If using a USB Hard drive you can record Television
We recommend a externally powered HDD or the inbuilt HDD
Please note some external Hard drives work better than others.
We recommend that the Hard drive be for use with the SHD990 only and is
formatted by the SHD990 from the Multimedia Menu.
Record from the EPG
Press Guide button this will bring up the program guide , use arrow buttons to
move around the guide Press the Record button to start recording the highlighted
program - you will see the guide change RED for that time slot.
Press ‘TIMER’ button to activate the timer
Once the timer options come up on the screen you can change start & stop
times. or record once / daily , weekly etc press ‘OK’ and you can edit
Press ‘OK’ when done to save the timer.
To Play Back ,
Press ‘MEDIA’ button on the remote control,
then select the program to watch - then press OK to start.
The other option is to press Menu button, then you can look for files stored
on the hard drive or external media.
Tips:
You can record one channel and watch another or a recorded file.
if you record 2 channels at the same time you will be unable to watch anything
the screen will go blank.
When selecting a instant record , you may have to wait a few seconds for the recording
to start, this is due to some Hard drives activating a sleep function.
If you do not have the LOOP cable installed on the back of the SHD990
then you will not be able to record and watch at the same time.
To list your record timers press the Timer button on the remote control
To delete a timer - select the timer and change the mode to OFF.
There are 40 Timer slots for recording.
During play back if you have trouble with Audio lip sync, Please press stop,
then resume playing again and you should start playing again with audio in sync.
More detail information on recording may be available on the triax nz website
