Time set up
For most of the year this should be set to GMT +12:00
During Daylight savings you should set ‘Daylight Saving to ON’
Press ‘MENU’ and select the ‘System Set-up’ menu,
Highlight ‘Time Setting then press ‘OK’
Then you will find the option for Daylight Saving
- here you can Change - use the left & right arrows
Press ‘Back Button’ to save.
Note
: with Daylight Saving usage ON the time is set to GMT +13.
After changing the time you may have to power your SHD990 off.
Signal Bars
To get signal & quality bars on your SHD990,
Press ‘INFO’ button on the remote control.
This will bring up the signal and quality bars,
Signal with no quality may indicate you are aligned to the wrong
satellite.
No Signal or Quality , your dish may not be connected correctly.
Note:
If you are using the second tuner for recording you will only see bars for Tuner 1.
Move channel order.
Press ‘MENU’ select ‘Channel Set up menu’.
Highlight ‘Edit Channels’ and press ‘OK’
Use the arrow buttons to locate the channel you wish to move ,
Then press the ‘OK’ button to select the channel to be moved.
Scroll up or down till that channel is in the position required.
Press ‘OK’ again to lock it into place.
Repeat for each channel you wish to move.
Scroll left to highlight Radio channels to move - repeating the steps above.
Once done , press ‘Back Button’ to finish
Press the ‘RED’ button to save
To DELETE a channel ,
Still in the Edit Channel menu
Delete Channels and press okay
Press the ‘OKAY‘ Button to chose the channels you want to DELETE (a tick will appear beside the ones to be deleted)
Once you have done this for all channels you wish to delete then press the RED button to save you changes.
You may be asked for the PIN number.
The DEFAULT PIN IS 0000
