![background image](http://html1.mh-extra.com/html/triax/dvb-c1/dvb-c1_user-manual_1160890046.webp)
18 DVB C1
GB
z
4. Event Name : Select the Event you want to record.
z
5. Timer Type: Set the timer type for the current timer setting.
Select whether to use the current timer setting only once or
continuously. (Once/Daily-at the same time/Weekly-at the same
time)
z
6. Start Date: Set the start date of recording (Date/Month/Year).
z
7. Start time: Set the start time of recording (Hour/Minute).
z
8. End Date: Set the end date of recording (Date/Month/Year).
z
9. End Time: Set the end time of recording (Hour/Minute).
6
When the settings are complete, press the
Store
button to save the
settings. If the channel you selected is locked, the password entry
screen will appear. Enter the password.
7
delete the entry list :
z
Select the list to use the
Up
or
Down
buttons.
z
Delete in the list to use the
Left
or
Right
buttons.
z
Select “yes or no” in Message box to use the
Left
or
Right
buttons.And then press the
OK
button.
8
You can check the recording schedule from the
VCR Timer
screen. To exit the
VCR Timer
screen, press the
Exit
button.
NOTE:
z
A message appears 1 minute before the recording start time, asking you whether to proceed with recording. To
proceed with recording, press the
OK
button.
z
Even if the power is off, the main unit will automatically power on at the recording start time to proceed with
recording. When recording is finished, it will return to its previous state.
z
Once recording starts, only the channel that is currently being recorded will be displayed. “
REC
" will be displayed
on the front panel of the main unit. During recording, If you want to Exit,Press the
exit
button and select the”Yes”
in message box,and then press the
OK
button.
z
If Timer Type is set to "Once", the relevant Recording List will be deleted after recording ends. If Timer Type is set
to "Daily" or "Weekly", the channel information will be saved for the next scheduled date.
z
Press the
Timer
button on the remote control to switch to the
VCR Timer
screen.
z
If the
Local Time
screen appears because the current time is not yet set, set the current time. After setting the
current time, press the Store button, and then automatic switch to the
VCR Timer
screen.