GB
10 DVB C1
3.2 Using Other Functions
3.2.1 Controlling the Volume
Volume Control
Use the
Vol Up/Down
buttons on the remote control to control the volume. When the volume control display appears,
you can also use the
Left/Right
buttons to adjust the volume. After the volume is adjusted, the volume control display
will automatically disappear.
Muting
Press the
Mute
button on the remote control to turn off the sound temporarily. Press the
Mute
button again to restore
the sound.
3.2.2 Audio Setup
Audio Setup is divided into Audio Language setting and Audio Mode setting.
1
Press the
Audio
button on the remote control.
2
At the Audio Language setting (above), use the
Left/Right
buttons to select one of the languages offered by the
relevant channel.
3
Use the
CH Up/Down
buttons to select the Audio Mode setting (below).
4
Use the
Left/Right
buttons to select the desired audio mode. The available modes are as follows:
z
Stereo: The sound comes from both speakers.
z
Mono(L): The sound comes from the left speaker only.
z
Mono(R): The sound comes from the right speaker only.
z
AC-3: Dolby Digital (To listen to Dolby Digital, connect an amplifier that supports Dolby Digital decoding to the
Digital Audio output.)
5
To return to normal screen, press the
Exit / Audio
button on the remote control.
3.2.3 Listening to the Radio
The STB also allows you to listen to radio stations.
1
To listen to the radio, press the
Radio
button on the remote control.
2
When the Channel List screen appears, use the
Radio
button to
select the TV/radio channel and then press the
OK
button.
Use the
Numeric
buttons to select the desired radio channel.
Alternatively, use the
CH Up/Down
buttons to select a radio channel,
and then press the
OK
button.
