![background image](http://html1.mh-extra.com/html/triax/dvb-75si/dvb-75si_user-manual_1160889007.webp)
TRIAX DVB 75 SI
7
7KHIURQWRIWKHVDWHOOLWHUHFHLYHU
1)
Standby (on/off) button
2) Step-by-step
change
of
programme/channel.
3)
Embedded Viaccess smart card
reader.
4)
Common Interface slot
(For PCMCIA CA modules. For
decoding via different Common Access
standards)
7KHUHDURIWKHVDWHOOLWHUHFHLYHU
5)
LNB INPUT
: For connection of the
aerial cable from the LNB unit.
6)
AERIAL IN
: For connection of the
cable from a VHF/UHF antenna or a
cable system.
7)
TV OUT
: For connection to a television
set via an RF aerial cable.
8)
TV
: SCART connector for connecting
the satellite receiver to a television set.
Cable included.
9)
VCR
: SCART connector for connecting
the satellite receiver to a VCR.
10)
L/R AUDIO
: Phono connector with
stereo audio signal for connecting the
satellite receiver to a HI-FI stereo set.
11)
Digital audio
: Phono connector with a
digital audio signal.
12)
Phone
: Telephone connector for
connection to an analog telephone
connection
13)
Mains connection:
The satellite
receiver is ready for operation when
connected to the mains (230V, 50Hz)
14)
RS232:
For connection of a PC.
7KHUHPRWHFRQWURO
15)
Standby
(On/Off). Sets the receiver in
standby mode. It will start from the
favourite list and the channel last used.
16)
Muting
: Temporary sound switch-off.
17)
A/B
: Activates the audio menu on the
screen in case of channels with several
audio tracks.
18)
TV/SAT
: Switches between TV, VCR
and SAT signals to the television set.
19)
TV/R
: Switches between digital
television and radio reception.
20)
0-9
: Numeric buttons from 0 to 9 for
direct entry of programme place num-
bers and other numeric entries. When
using interactive services, the buttons
are taken over by the application.
21)
P+
and
P-
: Step-by-step change of
programme.
22)
Info
: Activates information banner
23)
exit
: Exits running application or menu.
24)
back
: Goes back to the previous level
of the interactive application or the
main menu.
25)
menu
: Activates and displays the
receiver main menu for system
settings.
26)
guide
: On Viasat channels the Viasat
OpenTV portal application is activated,
and on other channels the Triax EPG
is activated.
27)
V+
and
V-:
Step-by-step volume ctrl.
28)
OK
: Opens and displays the current
programme list and confirms entries.
29)
Cursor buttons
: Active during
interactive applications and in the main
menu for change of function and line
on the screen.
Outside applications: Up/Down
functions as channel switch and
left/right as volume control.
30)
Red, Green, Blue, Yellow
: Function
buttons the function of which depends
on the interactive application active at
any time.
Function at normal television reception:
yellow
= Triax EPG
blue
= Subtitle language on pay-TV
channels
green
= Channel/signal information
When in standby mode the receiver
may also be started by means of these
buttons and thus your respective
favourite programme lists will be
activated:
red
= Danish programme list
yellow
= Swedish programme list
blue
= Norwegian programme list
green
= Viasat/General programme list
Summary of Contents for DVB 75SI
Page 1: ...UK User s guide...
Page 28: ......