background image

TRIAX DVB 75 SI 

17

You can use the 

[P+]

 and 

[P-]

 buttons of the remote control to go to 

the previous or next channel of the programme list.  

You can use the numeric buttons of the remote control 

[0-9]

 to select 

any channel number from the active programme list. The numbers 
entered are displayed in a small box at the bottom left-hand corner of 
your TV screen.  

If you hesitate more than 3 seconds after entering a 
number of the channel number, the satellite receiver 
assumes that you have completed your entries and 
switches to the channel number entered.  

The satellite receiver will switch more rapidly if you 
press the 

[OK]

 button when you have entered the last 

number.

The 

[arrow up]

 and 

[arrow down]

 buttons of the 

remote control can be used for changing channels 
just as 

[P+]

 and 

[P-].

 Note that these two buttons 

may have another function during execution of an 
OpenTV application, which may take over both 
buttons.

4XLFNFKDQJHRIFKDQQHOVIURPWKHIURQWSDQHO

In addition to the 

[standby]

 button on the satellite receiver front 

panel, there are two buttons that have the same functions as the 

[P+]

 and 

[P-]

 buttons of the remote control, as described above. 

4XLFNFKDQJHRIFKDQQHOVYLDDVFUHHQOLVW

As an alternative to the methods for change of channel described 
above a screen picture can display the active programme list.  

The programme list will be displayed on the screen 
when the 

[OK]

 button is pressed during ordinary TV 

watching. 

You can scroll through this programme list using the 

[arrow buttons]

 of the remote control and switch to 

any channel by marking it in the list and pressing the 

[OK]

 button of the remote control.  

At the top of the screen you can see which 
programme list is currently active (the picture shows 
a red list, the Danish programme list). You may 
change to one of the other lists by setting the receiver 
in standby mode (press the 

[standby]

 button), and 

switching it on again by pressing one of the other 

[coloured buttons]

.

When the 

[back]

 button is pressed, the screen list 

will disappear without any change of channel. 

$%

(;7

799&56$7

#

3

3

Summary of Contents for DVB 75SI





























Reviews: