background image

TRIAX DVB 75SI 

14

'LJLWDODXGLRFRQQHFWLRQ$&

If your Hi-fi amplifier has a digital audio input, you can connect the 
AUDIO OUT DIGITAL connector to the digital audio input on your 
amplifier. Available sample frequencies: 16, 22.05, 24, 32, 44.1 and 
48 KHz. 

NOTE:

 If you receive a satellite channel transmitting full AC3 digital 

sound, you must choose the AC3 audio channel via the 

[A/B]

 button 

on the remote control and the corresponding screen menu. When 
the AC3 audio channel has been selected, the sound is exclusively 
transmitted from the digital audio output of the satellite receiver (See 
also chapter 4.4.4). 

3&FRQQHFWLRQYLDVHULDO56FRQQHFWRU

The RS232 connector can be used for linking the satellite receiver 
with the serial COM port of a PC. A so-called ’straight through’ serial 
cable must be used (pin-1-to-pin-1, pin-2-to-pin-2, etc.).  

From Triax’ home page (http://www.triax.dk) you can download e.g. 
new software for updating the satellite receiver system software via a 
PC programme (e.g. HyperTerm). For this purpose you have to use 
the serial number of your receiver. The system software can also be 
updated via satellite without use of a PC. 

&RQQHFWLRQRIDPRGHPWR\RXUWHOHSKRQHOLQH

The DVB 75SI has an integrated telephone modem. You must 
connect the satellite receiver modem connector via the supplied 
telephone cable (10 m) to the nearest telephone socket in your 
house. If the cable is too short, extension cables and connection 
boxes are available from your teleshop.  

Often the connection can be made via the small RJ-11 connector in 
the supplied cable which fits into the ’phone’ connection of a number 
identifier, answer phone or fax. Alternatively, you can go to the 
teleshop to buy an adapter which fits into the wall socket of your 
telephone connection.  

The modem connection of the satellite receiver requires connection 
to a normal telephone line. If you have an ISDN installation, you can 
only connect the model to the telephone line if you have an A/B or 
TA adapter which gives a normal analog telephone signal. An ISDN 
modem usually features such an adapter or it can be bought 
separately in your teleshop.  

Digital audio 

Modem connection
via wall socket 

Modem connection
via number 
indicator 

Summary of Contents for DVB 75SI





























Reviews: