![background image](http://html1.mh-extra.com/html/triax/cgsd-162/cgsd-162_assembly-instruction-manual_1160764009.webp)
- 9 -
CGSD 162
6
f
inal
proCedures
After installing the head-end station, retrofitting accessories or installing mod-
ules it is necessary to tighten all cable connections, F terminals and cover screws
in order to maintain compliance with current EMC regulations and to ensure a
reliable operation.
•
Securely tighten the cable connections (F connector) using an open-ended
spanner (spanner gap 11 mm).
• Programme the modules connected and the head-end station if necessary.
• Position the breakthroughs in the base plate above the fastening screws
2
.
• Push the base plate in direction of the arrow and lock it with the locking
screw
1
.
• Tighten the fastening screws
2
.
1
2
2
2
• Tighten the nuts of retrofitted F terminals if applicable.
• Mount the front cover (see the assembly instructions of the head-end station).