![background image](http://html1.mh-extra.com/html/triax/cgsd-162/cgsd-162_assembly-instruction-manual_1160764006.webp)
- 6 -
CGSD 162
4
i
nstalling
the
sat if
input
distributor
Before installing or changing a module or accessory, switch off the head-
end station or unplug the power cable from the mains power socket.
Installing the SAT IF input distributor take care that no cables are squeezed
off or injured.
• Remove the front cover and the base plate of the CSE 2800 head-end sta-
tion.
• Insert the SAT IF input distributor
1
above the output collector
2
so that
the LNB power connection
A
is facing the control panel.
1
A
2
• Fasten the outer sockets of the SAT IF input distributor
3
with two nuts and
lock washers put under each.
3
3
Tighten the nuts until the teeth on the lock washers have penetrated the exte-
rior coating and a good connection is made between the housing and the SAT
IF input distributor.