![background image](http://html1.mh-extra.com/html/triax/cc2ct-800-c/cc2ct-800-c_assembly-instruction-manual_1160852025.webp)
- 25 -
CC2CT 800 C
o
Per ation
with
a
Ca
module
In order to descramble scrambled channels a corresponding smart card is
needed.
The channels to be descrambled are set in submenu "station filter".
s
tation
filter
– s
eleCtion
In this menu stations (services) of a transponder can be switched off.
Herein you select which scrambled station should be descrambled using an
adequate CA module.
01/04
Bx 4A
/B
TV +
arte
—> All stations from the channel strip will be read, and then displayed
with name and station type.
—> If no station is found, the following error message will appear in the
display: "
FILTER no Service
".
In this case, check the configuration of the antenna system and
head-end station, as well as the previously adjusted settings for the
cassette.
—> The display shows e.g.:
Bx 4A TV + 01/04
arte
Meaning of the indicators in the example:
"
Bx 4A
"
Slot 4, channel strip "
A
"
"
TV
"
TV channel type
"
+
"
The currently selected station is switched on.
"
01/04
"
The 1st of 4 stations is being displayed.
"
arte
"
Station name
Further possible terms displayed:
"
RA
"
Radio channel type
For radio stations, the background of the screen of the
connected TV or test receiver is darkened.
"
–
"
The currently selected station is switched off.
"
*
"
The star means that the TV or radio station selected is
encoded. To enable the stations, the CA module and
the appropriate smart card of the station provider are
required.