![background image](http://html1.mh-extra.com/html/triax/cc2ct-800-c/cc2ct-800-c_assembly-instruction-manual_1160852021.webp)
- 21 -
CC2CT 800 C
QAM-Modulation:
In this menu item you can set the QAM modulation.
—> For higher QAM modulation, the output symbol rate is lowered. An
output QAM modulation of > 64 QAM places a large burden on the
cable network. Due to noise, delay and frequency response prob-
lems, reception of the converted output signal can be affected.
• Use the
buttons to place the cursor under "
QAM…
".
Bx 4A
!
6900 QAM 256
QAM–MODE
POS
• Use
to set the QAM modulation ("
4
" … "
256
").
Inverting the user signal:
For exceptional cases and "older" digital cable receivers, the spectral position
of the user signal can be inverted "
NEG
". Factory default is "
POS
".
• Use
to place the cursor under "
POS
".
Bx 4A
!
6900 QAM 256
QAM–MODE
POS
• Use
to set the spectral position to "
NEG
".
• Press the
button.
—> The "Substitute signal in the case of an incorrect input signal" –
"
FAILURE
" submenu is activated.
s
ubstitute
signal
in
the
Case
of
an
inCorreCt
inPut
signal
You use this menu to set whether a "
Single Carrier
" signal should be provid-
ed or the self-made tables "
Tables
" should transmitted furthermore whenever
an incorrect input signal occurs.
FAILURE
Bx 4A
/B
Tables