![background image](http://html1.mh-extra.com/html/triax/cc2ct-800-c/cc2ct-800-c_assembly-instruction-manual_1160852013.webp)
- 13 -
CC2CT 800 C
4
t
he
Control
Panel
at
a
glanCe
4.1 m
enu
items
Programme the cassette using the buttons on the control unit of the head-end
station. The two-line display of the control unit then shows the menus.
The parameters and functions to be set are underlined.
Use the
key to select the following main menu items:
– Output signal settings:
Modulator on/off, level
Output channel / Output frequency
QAM modulation
Substitute signal
– Input signal settings:
Kind of modulation
Physical Layer Pipes / Slices
Input channel / frequency
Station filter
CA module
Economize descrambling capacity
– Options:
Transport stream and ORGNET-ID
BAT, STD-other
Deleting a PID
Renaming a PID
– Data rate
– Network Information Table (NIT)
– Factory reset
4.2 C
ontrol
Panel
The key pad on the head-end station is used to scroll through the menus step-
by-step:
scrolls forward through the menus.
select parameters in the menus.
set values, initiate actions.
selects sub-menus.
scrolls backward through the menus.
saves all entries.
BE-Remote
V 45
please wait . . .