9
Timer settings
On main operation interface screen, press
to enter Timer setting interface.
Then press
and
to set Timers, there are 4 groups of Timers.
When Time 1 is flashing, press
to enter Timer 1 ON “hour” digit setting which will flash, then
press
and
buttons to set value for “hour” digit.
After setting Timer 1 ON “hour” digit, press
again to enter into Timer 1 ON “minute” digit which
will flash, then press
and
buttons to set value for Time 1 ON “minute” digit.
After setting Timer 1 ON “minute” digit, press
again to enter into Timer 1 OFF “hour” digit,
The setting way is same as above.
When finish setting Timer OFF time, press
again to confirm current Timer settings, and enter
Timer 2 ON/OFF settings, the operation is same as Timer 1 settings, then back to main operation
interface.
On Timer setting interface screen, press
for 5 seconds to cancel current Timer ON/OFF settings.
On Timer setting interface screen, if there is no press on any button for continuous 30 seconds, system
will automatically confirm current Timer settings and return to main operation interface (Timer
memory is available if power off.).
On Timer setting interface screen, press
to confirm current Timer settings and back to main
operation interface.
Settings way for other groups of Timers is same as Timer 1.
Timer 1,2 are for unit ON/OFF, Timer 3 is for return water, Timer 4 is for water refilling.
Lock and unlock buttons
Under locked button status, press
for 3 seconds, after a buzzer, button will be unlocked.
Automatically lock buttons if there is no press on any button within 60 seconds.
Cooling mode
Press
for 5 seconds, can switch different modes: cooling, heating/hot water.
Forced defrosting
Under unit ON status, press
for 3 seconds to enter forced defrosting.
Press
for longer time till unit turns off, 3 minutes later the forced defrosting will exit.
Or if defrosting time reaches Parameter “H5”, the forced defrosting will exit as well.
Remove error history record
On error history query interface screen, press
and
for 5 seconds to remove error history
records.
Reset
Under unit OFF status, press
and
for 5 seconds, parameters will resume initial factory
default value.
