19
TROUBLESHOOTING
This section provides useful information for diagnosing and correcting certain issues which may occur.
General guidelines
Before starting the troubleshooting procedure, conduct a thorough visual inspection of the unit and look for obvious
defects such as loose connections or defective wiring.
Before contacting your local dealer, read this chapter carefully, it will save you time and money.
WHEN CONDUCTING AN INSPECTION ON THE SWITCH BOX OF THE UNIT, ALWAYS MAKE SURE THAT THE MAIN
SWITCH OF THE UNIT IS SWITCHED ‘OFF.’
When a safety device was activated, stop the unit, and find out why the safety device was activated before resetting
it. Under no circumstances safety devices may be bridged or changed to a value other than the factory setting. If the
cause of the problem cannot be found, call your local dealer/installer.
