QUICK GUIDE
Before You Start…
1. Install the collar strap(s) (page 7).
2. Install the transmitter antenna (page 10).
3. Charge collar and transmitter batteries
for 14 hours (page 21).
Using the Remote Trainer
1.
Turn the collar on: Set the intensity knob on 0 (zero).
Hold the transmitter within 10 feet of the collar and
hold a button down for about 5 seconds. The collar light
double-blinks to confirm it is turned on. (A rapid blink
means that collar batteries are low.) Move the intensity
knob off of 0 (zero) for training. Repeat the turn-on
process to turn the collar off.
2.
Fit the collar on the dog: Fasten the collar strap midway
between the dog's ears and shoulders, and buckle
snugly. The collar light faces towards the dog's nose. Do
not leave a collar on a dog continuously. See page 14.
3.
Select an intensity level for training: Level 1 is the
lowest; level 6 is the highest (level 5 is the highest on
the Classic 70). Release the transmitter button when
c h a n g i n g levels during training. Intensity selection
tips are in the training manual and video that came
with your Remote Trainer.
4.
Stimulation: If you are unfamiliar with the stimulation
features of your model, see the chart on page 17.
5.
Tone and Beeper button: On selected models, the
transmitter light is a push-button that controls an
audible tone in the collar. On the Upland Special
XL
,
this button turns the Beeper on or off remotely.
6.
Multi-dog models: The color-coded transmitter toggle
switch selects the active collar.
T R I - T R O N I C S
Q u i c k G u i d e
Quick Guide
Page 1
Summary of Contents for BeaglerXLFlyway SpecialXL
Page 4: ...Notes T R I T R O N I C S Notes ...
Page 36: ......
