TRI tool SEVERMASTER 576AC, Operation Manual

Page: 17 / 40

Model 576AC SEVERMASTER ™
92-1924 Orig. 201016 15
Stainless steel, which work hardens, must be worked with a heavy enough feed to
stay under the work hardened surface.
Feed at rate of at least .003” (.08mm) to .005” (.13mm) per revolution.
Never allow the bit to burnish the surface.
Reducing cutting feed and speed will normally minimize any chatter problems.
MATERIAL CUTTING CAPABILITIES
Mild steels, chrome steels (Rc 35 max.), stainless steel, copper-nickel and aluminum
without limitations other than size and wall thickness as specified.
Inconel and some other high-temperature alloys may require special procedures as
a function of wall thickness. Contact TRI TOOL INC’s Engineering Department for
details.