Model 204B BEVELMASTER
™
92-0699 Rev. 060412
11
PIPE CUTTING CAPACITIES
Basic Pipe Sizes
1”
Pipe
Schedule 40 (Small Mandrel required to mount in 1” schedule 80 and
above.)
1 1/4” through 2 1/2” Pipe
Up to Schedule 80
3” through 4” Pipe
Up to Schedule 40
* Some Schedules may require optional equipment.
Basic Tube Sizes
Up to .250” (6.4 mm) wall tubing with a maximum OD of 4.50” (114.3
mm) and a minimum ID of 1.25” (31.7 mm) may be beveled with standard
mandrel.
Wall Thickness Capacity (Limitations)
Wall thickness of schedules listed, .276” (7 mm) maximum, in the range
listed can be machined without limitations.
Wall thicknesses greater than .276” (7 mm) require special procedures and
are subject to Duty Cycle limitations to prevent motor damage. Contact Tri
Tool Inc. for heavier wall procedures.
Counterboring Operations
The tool will counterbore pipe and tubing with an ID of 1.50” (38.1 mm) to
4.33” (110.2 mm).
DUTY CYCLE
The 204BE with an electric motor (P/N 58-0147 or equivalent) duty cycle on high
cutting load applications (see above), is limited to 50% ‘On’ time with a maximum
of five (5) minutes continuos ‘On’ time.
Summary of Contents for BEVELMASTER 204B
Page 1: ...Operation Manual 92 0699 Rev 060412 Model 204B BEVELMASTER ...
Page 45: ......
