TRI TOOL INC.
92-1870 Rev. 201007
10
3. GENERAL DESCRIPTION
3.1 DESCRIPTION
The Model 765RVC2 (P/N 01-2216C) Remote Volume Control Hydraulic Power Supply
is a variable-volume, 0 (0 L/s) to 15 (.94 L/s) gpm, pressure-responsive, 0 (0 kPa) to
1800 psi (124.1 Bar), reversible-flow power unit.
The Model 765RVC2 supplies hydraulic power to cutting and weld end preparation pipe
lathes with integral hydraulic motors.
Although the pump capacity is 0 gpm (0 L/s) to 22 gpm (10 L/s), operating pressure
must be limited to 1000 psi (68.9 Bar) at flows over 15 gpm (.94 L/s) to avoid overloading
the motor.
The Hydraulic pump has a cross port pressure relief set at 1800 psi (124.1 Bar).
The Pendant provides start, stop, emergency stop, volume control, and forward/neutral/
reverse flow direction control.
The Pendant allows operation up to 200’ (61 m) away from the power supply by addition
of a Pendant Extension Cable and Hydraulic Hoses.
For portability, the power supply is integrated into a cart frame with casters. The unit
can be lifted with the four lifting eyes at each corner of the top of the frame.
MODEL DESIGNATIONS
P/N
with Kit No.
Input Voltage
01-2216C
05-1376
480 VAC
05-1377
240 / 208 VAC
3.2 INTENDED USE
This equipment is intended for professional use.
The equipment is intended to be used by a person with knowledge and experience in
the use of a machine of its type, without limitations in the physical abilities of the upper
limbs and without visual impairment.
The machine is intended to be used with the operator in the upright position while
operating the Hydraulic pump and in a variety of stances as required by the application
while using the remote pendant.
3.3 REASONABLY FORESEEABLE MISUSE
The 765RVC2 can be lifted by the four lifting eyes, or by a fork lift by the bottom of the
frame.
Do not allow personnel to stand under the 765RVC2 when it is lifted.
