manualshive.com logo in svg

Tri-Clover 741 Series, Service & Installation Manual

Share
Download
Tri-Clover 741 Series Service & Installation Manual Download Page 2

- 2 -

CONTENTS

Thank you for purchasing a Tri-Clover Product!

This manual contains disassembly and assembly instructions, maintenance procedures, and a
complete parts list for all 761, 741, 762, 771 Air Actuated Valves, designed and manufactured by
Tri-Clover, Inc., Kenosha, Wisconsin.

READ THIS MANUAL

 carefully to learn how to service these valves.  Failure to do so could

result in personal injury or equipment damage.

SAFETY

IMPORTANT SAFETY INFORMATION ................................................................................................. 3

INTRODUCTION

ABOUT THIS MANUAL ........................................................................................................................ 4

MAINTENANCE

VALVE DISASSEMBLY ......................................................................................................................... 5

VALVE DISASSEMBLY ......................................................................................................................... 6

VALVE COMPONENT INSPECTION ................................................................................................... 7

VALVE ASSEMBLY ............................................................................................................................... 8

"TR" STEM/SEAT ASSEMBLY ............................................................................................................ 10

TYPE 10, 20, AND 30 ACTUATORS ................................................................................................... 11

TYPE 80 ACTUATOR ......................................................................................................................... 13

TYPE 15 AND 25 ACTUATOR ............................................................................................................ 15

PARTS LIST

761/741 SHUT OFF • DIVERT • REVERSE ACTING SHUT OFF ...................................................... 18

771 THROTTLING .............................................................................................................................. 21

762 KETTLE • TANK OUTLET • TANGENTIAL .................................................................................. 24

761 Y-BODY ........................................................................................................................................ 27

 

Summary of Contents for 741 Series
































Reviews:

No comments

Brands by name

Popular brands

Load more brands