14
container (5) to the hook in the lower part of the
body and the engine then lock the top until you hear
a click.
Fig. 4
4. Remove the dust bin
Press the release button of the container (9) at the
top of the unit and pull the dust bin toward you,
as shown in Figure 4.
SWITCH ON THE UNIT
-
Before plugging the unit, ensure that the power switch (4) is OFF.
-
Connect the plug. Take the cleaner and switch it on.
CAUTION
:
the vacuum cleaner is powerful. Hold it firmly to prevent it from falling causing damages
or personal injury.
EMPTY THE CONTAINER
In order to ensure the best performances and having no losses in the air flow and cleaning power, periodically
drain the container.
CAUTION: before emptying and/or start cleaning the dust bin, unplug the unit from the main
electrical outlet.
To empty the container, follow the steps below:
-
Unplug it from the electrical outlet.
-
Bring the product above a bin and press the release button (15) as shown in Figure 5. This button will open
the door dropping all the dirt. It is recommended to do this outdoors to avoid soiling the house when the
dust comes out of the trash. Close the door
To clean the filter system:
-
Release the multi-cyclone filtration system (13) by opening the hooks (6) on the sides of the dust bin (5).
Place the cyclone filter on the can and shake it to bring down the dirt (see Figure 6 for reference) or,
alternatively, clean it with a brush. Install the filter system (13) inside the container (5) and lock with the
hooks (6).
Fig.5
Fig. 6
