18
FUNCTIONS STAND-BY, AUTO-OFF, OFF
To limit energy consumption when not in use, this machine has 3 functions.
Function Stand-by
: for 30 minutes from the last use, the machine remains in stand-by and keeps the water at
the right temperature, ready to make coffee.
Function Auto-Off
: 30 minutes after the last use, the machine turns off automatically. To make a coffee,
press one of the coffee preparation buttons (9 -
) or (10 -
). The lights of buttons twinkle to indicate that
the appliance is heating, and then they stay on when the appliance is ready.
Function OFF
: he machine can be turned off at any time by pressing the main switch (7).
CLEANING
Unplug the power cord from the electrical outlet and allow the unit to cool down before cleaning.
Do not wash parts of the appliance in the dishwasher.
The machine must be cleaned regularly and daily, to keep it efficient and to extend the life of the appliance.
SERBATOIO E CORPO
Clean the fixed parts of housing (6) with a soft damp cloth. Do not immerse the main body in water. In any
case, avoid splashing water or other liquids from reaching those parts. Periodically clean the tank (2) and the
lid (1) with a soft sponge and dish detergent. Rinse and dry well before reassembling them.
GRID AND DRIP COLLECTING CONTAINER
Remember to empty the container (16) at least once a week. There is also a floater (14): if the floater comes
out of the grid (15), the tray is too full and must be emptied.
Periodically clean the grid (15) and the drip tray (16):
-
Disassemble these parts and empty the container (16).
-
Wash with a soft sponge and dish detergent. Rinse and dry well before reassembling them.
FILTERS (18 – 19 – 20)
With use, the filter holes could become clogged. Visually check that they are free.
If they are clogged, put the filter in the filter holder and assemble the machine without adding the coffee.
Press the 2 cups button (10) to dissolve impurities and coffee residues.
If you notice formation of limescale, immerse the filters in a solution of water and vinegar and leave to act for
6 hours. Afterwards, wash the filters with dish detergent, rinse and dry.
SEAT FOR LINKING THE FILTER HOLDER (13)
WARNING
: after use, do not leave the filter holder (21) inserted in its seat (13) in order to not damage the
gasket present in the filter holder seat.
With use, impurities and coffee residues may form even in the seat of the filter holder (13).
Periodically check the condition of this part, and if you notice any impurities, proceed with cleaning. Use a
soft sponge, unlock the holes gently with a needle and dispense hot water without mounting the filter holder
(put a large cup underneath and press the 2 cups button, repeat 2 more times).
STEAM EROGATION TUBE (5)
CAUTION
: clean the tube wand only when it is cold.
After each use of the tube (5), dispense steam for a few seconds to clean it of milk residues, and clean the
tube with a damp cloth. At least once a month, clean the parts of the dispenser:
-
Remove the tube (5) downwards. Remove the silicone handle (4) by pulling it downwards.
-
Clean the internal steam tube with a damp cloth.
-
Periodically clean the tube (5) and handle (4) with a soft sponge and dish detergent. Rinse and dry well
before reassembling them
DECALCIFICATION
Cleaning the coffee machine is necessary to make it work efficiently. Despite this, depending on the water
