14
XF 3500 PRO
VOICE ANNOUNCEMENT
Press and hold MODE button (4) on the unit or the MODE button (36) on remote control for a few seconds to switch ON/OFF the
voice announcement.
BLUETOOTH FUNCTION
1.
Turn on and press the MODE (4) on unit, or MODE (36) button on remote control to select the Bluetooth function, the display
shows "BLUE";
2.
In the Bluetooth mode, the symbol
on display will start flashing, the system automatically enters pairing mode;
3.
Activate the Bluetooth feature on the external device;
4.
Search the devices and select "XF 3500 PRO";
5.
Enter the password "0000" if required;
6.
Press the
(3) button on the unit or
(33) button on remote control, to start playing and the buttons
:
(10) or
9
(5) on unit
, or the keys
:
NEXT (34) and
9
PREV (26) for select a song.
USB/SD INPUT
1.
Turn on the unit;
2.
Insert a USB memory or an SD card into the USB or SD (8) slot. Playback starts automatically;
3.
To pause playback, press the
(3) button on the unit or the key
(33) on remote control, the display will show "PAUS";
press it again to resume playback;
4.
Press
:
(10) button on unit
or key
:
NEXT(34) on remote control while listening to switch to the next track. Press the
9
(5)
button on unit
or
9
PREV (26) on remote to go to the previous tracks;
5.
Using the numeric keypad (37) on
remote
control you can directly enter the number of the song you want to play;
6.
Press once
button (25) on the remote, the display will show "ONE", to continually play the same track; press it a second
time, the display will show "ALL" to continuously play all songs in the USB/SD.
Note:
- The player may not support some USB/SD devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
- From the computer to format the USB memory/SD FAT (16 or 32).
AUX-IN
1.
Press the MODE button (4) on the unit or press MODE button (36) on the remote control and select the "LINE IN" function;
2.
Connect any unit equipped with audio output, through a cable 3.5mm jack (included) to the AUX IN (20) input;
3.
Use the external device from their commands.
AUDIO-OUT
The Audio Out output (19) can be used to connect the unit to other amplified devices (by their AUX-IN input) to increase the audio
and the total power.
USING THE WIRELESS MICROPHONE
1.
Remove the cover at the back of the microphone, insert 2 "AA" size batteries paying attention to the polarity indicated and close
the cover;
2.
Turn on the microphone by switch upward. If the power indicator blinks or does not light, check to see if the batteries are
charged and have been inserted with the correct polarity;
3.
Adjust the volume by turning the MIC VOL knob (14);
4.
If the power indicator flashes when the microphone is turned on, the batteries are low, replace them immediately.
Note:
- The effective range of the wireless microphone is 15m. Do not use over that range.
- Do not use two microphones working on the same frequency or crosstalk and interference will occur.
- If you use more wireless microphones at the same time, they must be set to different frequencies and should be kept away
at least at 30m.
- Don’t put the device too close to a DVD/CD/VCD player as they have strong frequencies and might affect the microphone.
ENGLISH
