3
RA 766
English
CONTROL AND THEIR FUNCTIONS
1.
Telescopic antenna
2.
Dial scale
3.
Tuning knob
4.
Band switch AM/FM
5.
Volume knob / ON-OFF knob
6.
Phone jack
7.
AC cord / Battery compartment door (rear)
8.
Radio ON indicator
9.
Speaker
10. AUX-IN audio input (rear)
AC POWER OPERATION
Connect the plug to an AC outlet.
The connection of the mains lead to the AC socket
cause the disconnecting of batteries supply.
BATTERY POWER OPERATION
Install 3 x “D” batteries into the battery campartment
(7) on the backside of the device, carefully as
indicated in the battery compartment.
Remove the batteries when don't use the device
for a long time.
OPERATION
1.
Turn the Volume knob / ON-OFF knob (5)
clockwise until you listen a click sound, the
radio turns on.
2.
Select the desired radio band with the Band
switch (4):
FM = frequency modulation
AM = media wave
3.
Tune in a desired station by tuning the Tuning
knob (3).
4.
Adjust the Volume knob / ON-OFF knob (5) for
your desired listening level.
AUX-IN CONNECTION
Connecting the cable jack-jack 3.5 in to AUX-IN
(10), automatically the speaker produces the sound
of external audio unit.
RECEPTION NOTE
For FM reception pull out the Rod antenna (1)
adjust the direction, lenght and angle to give the
best reception.
The AM band antenna is internal so to improve the
reception orient the device.
PHONE JACK
For private listening connect a headphones (not
included) with a 3,5 mm plug (6). The built-in
speaker will automatically disconnected.
MAINTENANCE
This device is a high precision electronic instrument;
so it's recommended to not place the radio set near
sources of heat, in humid or dusty places, nor
expose it directly to the sunlight.
Clean the radio with a damp cloth. Using detergents,
abrasives or solvents may damage the radio set.
NOMINAL SPECIFICATION
Power sources:
AC 230-240V 50Hz
DC4.5V [3x"D"(UM1)
bateries not included]
Frequency range:
FM 87.5-108MHz
AM 540-1600KHz
Max consumption:
5W
Mode OFF consumption: <1W
Dimensions:
235x125x110mm
TREVI pursues a policy of continuous research
and development. Therefore the characteristics of
the product can differ from those in the description.
1
2
6
10
9
3
7
4
5
8
