background image

OM 3528 D

DIGITAL CLOCK

6

Off the alarm 1, the icon would appear or disappear.

•  At normal mode, press MODE key (3) two time to turn On/

Off the alarm 2.  Press the MODE key (3) three times the icon 

 and 

 are all disappear. All the alarms are off.

SNOOZE (SILENCES ALARM TEMPORARILY)

•  You can set the snooze from 1-59 minutes.
•  When alarm on, the icon 

 or 

 would flashing, press 

SNOOZE (5) to go into the snooze mode. Icon would appear 
in the display. 

•  When snooze on, icon 

 would flashing. 

•  In snooze mode, press any button to stop alarm for one day.
Note: The alarm will sound for 2 minutes and then shut off 

completely.

LOW BATTERY ICONS

When the icon 

 is displayed, replace batteries in the clock.

TECHNICAL SPECIFICATION

Power Supply:............. 3x“AA” size batteries, 1,5V  Main unit
                          2x“AAA” size batteries, 1,5V  External sensor
Indoor temperature Range:.......... 0°C ~ +50°C (32°F~122°F)
Outdoor temperature Range:........ -20°C ~ +70°C (-4°F~158°F)
Channels max.:............................................. 3 remote sensors
Transmission range: ........... up to 30 m outdoors, RF 433 MHz
Dimensions:............................................... 420 x 200 x 30mm

 USERS INFORMATION pursuant to Legislative Decree No. 

49 of March 14, 2014
“Implementation of Directive 2012/19/EU on Waste Electrical and 

Electronic Equipment (WEEE)”
This wheeled bin symbol on the product indicates that at the end 
of its life must be collected separately from other waste. The user 
must, therefore, take the remote control integrates the essential 
components that got to its life to the appropriate differentiated 
collection centers for electronic and electro-technical waste, or 
return it to the dealer when purchasing a new appliance of equivalent 
type, in terms of one to one, or one to zero for equipment having 
longer side of less than 25 cm. Appropriate separate collection 
for the decommissioned equipment for recycling, processing 
and environmentally compatible disposal helps prevent negative 
impact on the environment and human health and promotes 
recycling of the materials making up the product. Illegal dumping 
of the product by the user entails the application of administrative 
sanctions stated in Legislative Decree n. Legislative Decree No. 
49 of March 14, 2014.

TIME ZONE

The time is transmitted from the central Germany, so if we are 
in a country with different time than the Germany is necessary 
to set the time zone.
1.  When you hang time signal, press and hold for a few seconds 

the MODE button (3) to enter the manual clock setting. It will 
adjust the time format “24h” or “12h”.

2.  Press the MODE button (3) again, the display will show “00” 

with the words “Zone” flashing on the time zone.

3.  Set the time zone of your region through the UP (1) or DOWN 

°C/°F (7).

Notes: 
Place the weather station away from equipment that generates 
magnetic fields such as mobile phones, televisions etc....
It not in all areas of Europe may be able to receive the signal of 
the radio control. In this case you must set the time manually.

MANUAL SET TIME, DATE AND TEMPERATURE

1.  Hold the MODE key (3) steadily for around 3 seconds, the 

“12hr” or “24hr” would flash in 1HZ. Press UP key (1) or 
DOWN key (7) to adjust.

2.  Press MODE key (3) again, then enter into time setting mode 

and use UP key (1) or DOWN key (7) to choose the value. 
The time set order is hour, minute, year, month, date and day 
of week then display language.(see below message).

3.  The week will be automatically set.
4.  Press the MODE button (3) to exit, or wait 20 seconds without 

pressing buttons to return to the normal time display.

Note: 8 languages of weekday: English > German> French > 

Italian >Dutch > Spanish >Danish>Russian.

FAHRENHEIT/CELSIUS

Press the DOWN °C/°F button (7) to select Fahrenheit or Celsius 
temperature readings

SET TIME ALARM

Press the ALARM button (2) once to enter Alarm 1 Mode. The 
letters AL1 will show in the right corner display.

1.  Hold the ALARM button (2) for 3 seconds to enter alarm time 

set mode. 

2.  Press the UP (1) or DOWN °C/°F (7) buttons to adjust values.
3.  Press the ALARM button to confirm and move to the next 

item.

Alarm Time setting order: 1. Hours, 2. Minutes 3. Snooze time 
(1-59 min).
4.  ALARM 2 setting is same as alarm 1. 
5.  When alarm on, if you don’t press any key to stop the alarm, 

it lasts for 1 minute. Or you can press any key to stop the 
alarm.

ACTIVATE/DEACTIVATE TIME ALARM

•  At normal mode, press MODE key (3) one time to turn On/

ENGLISH

Summary of Contents for OM 3528 D

























Reviews: