TBS-800
4536
“EGA Spółka z o.o.” Spółka Komandytowa ul. Rzeczna 1, Nowa Wieś Rzeczna
83-
200 Starogard Gdański tel/fax:+48 58 56 300 80 ww.ega.com.pl
8
Fig.3
Lock-on Button
This machine is fitted with a lock-on button. When the on/off switch is depressed, press
lock-on button to get continuous operation without depressing the on/off switch (Fig.4).
Fig.4
Centralizing the sanding belt
Check that the sanding belt is running centrally before using .Centralizing the belt is
necessary to stop the belt running off the rollers. Turn the machine with the belt facing the
operator (Fig.5).Start the Sander and observe how the sanding belt is running.
If the sanding belt is seen to move along the rollers in either direction, it will require
centralizing before use.
Turn the centralizing knob (Fig.6) either clockwise or anti-clockwise to adjust the belt
tracking until the sanding belt is running centrally. Run the Sander for a short time.
If the belt is still not running centrally, use the centralizing knob to fine adjust the position of
the sanding belt.
Summary of Contents for 4536
Page 2: ......
