11
17
18
9
31
1
29
28
40
20
65
1
6
53
10
12
13
11
6
7
10
29
28
53
40
65
1
20
6
12
13
11
11
17
18
9
31
1
Step 2
Fix the seat (10) to the seat support tube (11),
using 3 x flat washers (12) and 3 x nylon nuts (13).
Step 3
Fix the seat (10) on to the seat post (9)
With 1 x flat washer (17) and knob (18).
Step 4
Slide the seat post (9) into the
main frame (1) and fix using
the push pin knob (31).
Seat adjustment
The pushpin knob (31) can be loosened and pulled
out to adjust the height of the seat (show above).
Once adjusted, ensure that the pushpin knob
is retightened.
The knob (18) can be loosened to allow the seat
to be moved closer or further away from the console
(show above). Once adjusted, ensure that the knob
is retightened.
Step 5
Slide the handlebar post cover (28)
over the handlebar post (29).
Step 6
Fasten the upper computer cable (40)
to the motor connector (65).
Step 7
Attach the handlebar post (29) to the
main frame (1) with 4 x flat washers
(6) and 4 x allen bolts (20) through
the side.
Step 8
Attach the handlebar post (29) to
the main frame (1) with 2 x curved
washers (6) and 2 x allen bolts (20)
through the front.
Step 9
Slide the handlebar post cover (28)
down to cover screws.
