TE0600 TRM
Revision: V3.02
Copyright © 2017 Trenz Electronic GmbH
Page
of
16
33
http://www.trenz-electronic.de
Unused IOB Pins option selection.
In the standard assembly, the /WDO (watchdog output) line is left unconnected1 and the only possibility to
reset the module is by driving the /MR (master reset) line active (low) through pin 18 of connector J2.
In the alternate assembly, the /WDO (watchdog output) line is connected through zero-resistor R3 to /MR
(master reset) line.
Caution
If alternate assembly is used, pin 18 of connector J2 must be left unconnected.
