BXT7059 / BXTS7059 Technical Reference
Saving & Exiting Setup
Chapter 6 Saving and Exiting BIOS Setup and Restoring Defaults
Introduction
There are four methods of saving BIOS changes and leaving Aptio TSE listed at the top of this screen:
1 - Save Changes & Exit
When you have completed the system configuration changes, select this option to save your BIOS changes
and leave Aptio TSE. You will need to reboot the computer for the new system configuration parameters
to take effect.
Select Save Changes & Exit from the Exit menu and press <Enter>.
Save Configuration Changes and Exit Now?
[YES] [NO]
appears in the window. Select
YES
to save changes and exit.
2 - Discard Changes & Exit
Select this option to quit Aptio TSE without making any permanent changes to the system configuration.
Select Discard Changes & Exit from the Exit menu and press <Enter>.
Discard Changes and Exit Setup Now?
[YES] [NO]
Select
YES
to discard changes and exit.
3 - Save Changes & Reset
When you have completed the system configuration changes, select this option to save the BIOS changes,
leave Aptio TSE and reset the computer so the new system configuration parameters can take effect.
Select Save Changes & Reset from the Exit menu and press <Enter>.
Save Configuration Changes and Exit Now?
[YES] [NO]
appears in the window. Select
YES
to save changes and reset.
4 - Discard Changes & Reset
Choose this option if you decide to discard your BIOS changes, but what to reset the system upon leaving
Aptio TSE.
Select Discard Changes & Reset from the Exit menu and press <Enter>.
Discard Configuration Changes and Exit Now?
[YES] [NO]
appears in the window. Select
YES
to discard changes and reset.
The following two screen options allow save or discard BIOS changes without leaving Aptio TSE:
Save Changes
[YES] [NO]
Discard Changes
[YES] [NO]
(i.e. load previous values)
6-1
Trenton
Systems
Inc.
