10
English
The console port uses a DB-9 RS-232 connector. The supplied straight through
RS-232 cable connects the console port of the TVP-224HR to a console PC or
terminal.
6. Connection through Console
Task
Prompt
Type
Connect RS-232 Cable to TVP-224HR RS-232 console port a
your computer that you will use as a configuring terminal
Baud rate
Number of data bit
Parity check
Number of stop bit
Flow control
19,200
8
None
1
None
123
Open HyperTerminal and enter the following Input Parameters
when prompted:
When HyperTerminal Screen appears type “123”
In the event that you forget your administration password, you
can gain console access to the TVP-224HR using the super
password. The super password is the last six digits of your MAC
address located on the bottom of your TVP (00-50-2d-xx-xx-xx).
At the Console prompt enter the super password without
hyphens. The password is all lower case. After gaining access,
at the console prompt type in
net set manager password
<new_password> <new_password>
net store
net reset
If entry of new password is successful, the console will list “OK”.
You will now be able to gain Web Access from a PC in the same
local segment using the TVP-224HR LAN IP Address. If Web
and / or Telnet Access are enabled, you will also be able to
remote access the TVP-224HR by entering http:// followed by
the TVP-224HR WAN IP or domain name.
