manualshive.com logo in svg

TRENDnet TV-IP501P - ProView PoE Internet Camera Network, User Manual, Page: 8 / 45

Share
Download
TRENDnet TV-IP501P - ProView PoE Internet Camera Network User Manual Download Page 8

TV-IP501P Internet Camera User Manual 

 

 

7

Camera Hardware Components 

Below is a summary description of the camera hardware. 

 

Audio Mic 

Used to capture sounds 

DC 5V 

The DC power input connector is located on the back of the camera’s rear panel and 

is labeled DC5V with a single jack socket to supply power to the camera. Power will 

be generated when the power supply is connected to a wall outlet. 

Reset 

The Reset procedure will be initiated when this button is pressed. The Factory 

Reset procedure will be initiated when this button is pressed and holded for five 

seconds. 

10/100 Ethernet 

LAN Port 

This RJ-45 connector is used to connect to a 10Base-T Ethernet or to a 

100Base-TX Fast Ethernet network. This port supports the N-Way protocol & 

Auto-MDIX, allowing the camera to automatically detect or negotiate the 

transmission speed of the network. 

Camera Stand   

Connector 

It’s located on the top and the bottom panel of the camera. This hole is used to 

connect the camera’s stand to the camera by attaching the screw head of the 

camera stand into the screw hole of the camera. 

LED Indicators 

PWR 

This LED indicator lights green when the camera is powered on. It remains dark when 

powered off. 

LNK 

A steady orange light indicates that the camera has a good connection to LAN. It starts 

flashing to indicate that the camera is sending and receiving data to and from the LAN.

 

 

 

 

 

 

Summary of Contents for TV-IP501P - ProView PoE Internet Camera Network














































Reviews:

No comments