manualshive.com logo in svg

TRENDnet TV-IP501P - ProView PoE Internet Camera Network, User Manual, Page: 5 / 45

Share
Download
TRENDnet TV-IP501P - ProView PoE Internet Camera Network User Manual Download Page 5

TV-IP501P Internet Camera User Manual 

 

 

4

System Requirements 

Computer 

z

 

CPU: For Intel x86 compatible CPUs: Intel Pentium IV 2.0Ghz or above 

z

 

CPU: For IA64 compatible CPUs: AMD Athlon 64 3000+ and above 

z

 

Memory: 1GB or above 

z

 

VGA Resolution: 1024 x 768 or above (Independent Display Card recommended) 

z

 

10BASE-T Ethernet or 100BASE-TX Fast Ethernet Network Interface Card   

z

 

CD-ROM Drive for Setup Wizard on Installation CD-ROM 

z

 

IPViewPro 2.0 Application Users must use Microsoft® Windows®2000, XP or Vista Operating 

System with Internet Explorer 6.0 or above with DirectX9.0 

Network 

z

 

Local Area Network: 10Base-T Ethernet or 100Base-TX Fast Ethernet 

 

Note: When you connect multiple cameras and monitor their images synchronously, it is 

recommended to use a high performance system, such as a Pentium 4 & 2.4GHz PC

 

Default Settings 

Default configuration settings 

Username 

This is the Username you will be prompted to enter when you access the 

camera configuration screens using a Web browser. The default Username is 

admin. 

Password 

This is the Password you will be prompted to enter when you access the 

configuration windows using a Web browser. The default Password is admin. 

IP address 

This is the IP address you will enter into the Address field of your Web browser 

to access the camera monitor screen and configuration menus using a Web 

Browser. The camera uses DHCP for IP settings by default. If a DHCP server is 

not detected, the default IP address is 192.168.10.30. (Make sure your 

computer is configured to belong to the 192.168.10.X subnet if using the default 

IP address of the camera.) 

Subnet Mask 

The default subnet mask is 255.255.255.0 

 

 

 

 

 

Summary of Contents for TV-IP501P - ProView PoE Internet Camera Network














































Reviews:

No comments