TV-IP501P Internet Camera User Manual
34
Camera configuration with IPViewPro 2.0
Access the camera configuration menus by clicking on the gear icon at the bottom of the right hand panel
of the IPViewPro 2.0 user interface. Configuration options include adding and deleting cameras from the
display view, configuration of motion detection and digital input with schedules, recording options, email
alerts and other network settings.
Adding a Camera
The procedure to add a camera after the initial launch of the software is very similar to the procedure
used during the first setup. Follow the instructions below to add cameras.
1.
Click the Configuration icon to view the
Camera Setup menu. The top most tab of
the menu is the Camera Management tab. A
list of active cameras appears on the left half
of the menu. Select the camera to be added
from the list. Click the Add Camera by IP
Address to find the specified IP address or
network URL of the camera you want to add.
2.
Select the camera to add from the list, enter
the administrator’s user name and
password, a preview of the live video display
will appear. Click the OK, add this camera
button, a confirmation message informs
when the camera is connected and added to
the IPViewPro 2.0 monitoring group. Repeat
this procedure for all the cameras being
added. Click the Exit button after all the
cameras have been added.
3.
The camera added now appears in the
Camera List. To launch the web manager for
the newly added camera or any camera in
the active camera list, select it and click the
Browse Selected Camera button.