TRENDnet User’s Guide
TV‐IP460PI
© Copyright 2019 TRENDnet. All Rights Reserved.
5
Cautions
Injury or equipment damage may be caused if any of these cautions are
neglected. Follow these precautions to prevent potential injury or material
damage.
•
Make sure the power supply voltage is correct before using the Camera
.
•
Do not drop the camera or subject to physical shock.
•
Do not touch sensor modules with fingers. If cleaning is necessary, use
a clean cloth with a bit of ethanol and wipe it gently. If the camera will
not be used for an extended period of time, put on the lens cap to
protect the sensor from dirt.
•
Do not aim the camera lens at the strong light such as the Sun or an
incandescent lamp. Strong light can damage the camera sensor.
•
The sensor may be burned out by a laser beam, so when any laser
equipment is being used, make sure that the surface of the sensor will
not be exposed to the laser beam.
•
Do not place the camera in extremely hot, cold temperatures (the
operating temperature should be between ‐10°C to 50°C), dusty nor
damp environments, and do not expose it to areas with high
electromagnetic radiation.
•
To avoid heat accumulation, good ventilation is required for a proper
operating environment.
•
Keep out of water and any liquid.
•
While shipping, the camera should be packed in its original packaging.
Plan for installation location
Viewing angle
The TV‐IP460PI is a Multi Sensor Camera. The main sensor is a PTZ (Pan‐Tilt‐
Zoom) camera with an adjustable viewing angle (56.6‐120
) that provides
non‐distorted and detailed images. The 3x surrounding multi sensors with a
fixed viewing angle (128.5
each) together provide a panoramic 360
image.
Choose a location that has good vantage point for shooting the surrounding
area in a method you expect to see. The motion detection area should also
be considered when installing the camera.