TRENDnet User’s Guide
TV‐IP460PI
© Copyright 2019 TRENDnet. All Rights Reserved.
60
PTZ (Pan/Tilt/Zoom)
Basic Settings
Set up basic settings for PTZ controls.
Basic Parameters
Enable
Proportional Pan:
If you enable this function, the pan/tilt speeds change
according to the amount of zoom. More zoom =
slower
Enable Preset
Freezing:
This function enables the live view to switch directly
from one scene, defined by a preset to another,
without showing the middle areas between these
two, to ensure the surveillance efficiency. It can also
reduce the use of bandwidth in a digital network
system.
Preset Speed:
You can set the speed of defined preset from 1 to 8.
Default: 4
Manual Control
Speed:
Select the manual control speed from the drop down
menu:
Compatible, Pedestrian, Non‐motor vehicle,
Motor Vehicle,
and
Auto.
Compatible:
The control speed is same as the
Keyboard Control Speed.
Pedestrian:
Choose Pedestrian when
monitoring pedestrians.
Non‐motor Vehicle:
Choose the Non‐motor
Vehicle when monitoring non‐motor vehicles.
Motor Vehicle:
Choose the Motor Vehicle
when monitoring motor vehicles.
Auto:
If the viewport of the camera contains
many different objects, selecting
Auto
is
recommended.
Keyboard Control
Speed:
Define the speed of PTZ control by a keyboard as Low,
Medium or High.
Max. Tilt‐angle:
The maximum angle that the camera can revolve in
the tilt direction is adjustable.
Zooming Speed
The speed at which the camera zooms. Default: 3
PTZ OSD
Zoom Status:
Set the OSD duration of zooming status as 2 seconds
to 10 seconds, NC (Normally Closed) or NO (Normally
Open).
PT Status:
Set the angle display duration white panning and
tilting as 2 seconds to 10 seconds, NC (Normally
Closed) or NO (Normally Open).