TRENDnet User’s Guide
TV‐IP460PI
© Copyright 2019 TRENDnet. All Rights Reserved.
31
PPPoE (ADSL)
Setup PPPoE (ADSL) connection to connect your camera with your ISP,
Internet Service Provider
.
PPPoE (ADSL)
Enable PPPoE:
Check this box to enable PPPoE connection.
Dynamic IP:
The IP address assigned by ISP
User Name:
Enter the account name
.
Password:
Enter the password
.
Confirm:
Enter the password again
.
Click
Save
to save the changes
*Note: To view the camera remotely, please make sure the HTTP and RTSP
ports are opened (port forwarded) on your network/router.
SNMP
SNMP Settings allows you to assign the contact details, location, community
name and trap settings of SNMP. This is a networking management protocol
used to monitor network‐attached devices. SNMP allows messages (called
protocol data units) to be sent to various parts of a network
.
Upon receiving
these messages, SNMP compatible devices (called agents) return data stored
in their Management Information Bases.