TRENDnet User’s Guide
TV-IP321PI
© Copyright 2015 TRENDnet. All Rights Reserved.
39
802
.
1X
Setup 802.1X for remote authentication service.
802.1X Authentication
Enable IEEE
802
.
1X:
Check this box to enable 802.1X authentication
service.
EAPOL version:
Extensible Authentication Protocol (EAP) over
LAN (EAPoL)
.
Choose version 1 or 2
.
This version
number has to match to your 802
.
1X service
EAPOL version
.
User Name:
Enter the account name
.
Password:
Enter the password
.
Confirm:
Enter the password again
.
Click
Save
to save the changes
IP Address Filter
Set up a list of clients allow only the clients on the list to access this
camera or to reject clients on the list from access this camera.
IP Address Filter
Enable IP
Address Filter:
Check this box to enable IP address filtering
service.
IP Address
Filter Type:
Choose Forbidden to ban the listed IP addresses
or Allowed to allow listed host to access this
camera.
Add:
Click Add to add a user account
Modify:
To modify an entry on the list, highlight the entry
by clicking on it. Then, click the Modify button.
Enter the IP address then click OK
Delete:
To delete an entry on the list, highlight the entry
by clicking on it. Then, click Delete
Clear:
To clear all entries, click Clear
Click
Save
to save the changes