TRENDnet TV-IP321PI User Manual Download Page 33 | Manualshive

Page: 33 / 63

TRENDnet TV-IP321PI User Manual Download Page 33

TRENDnet User’s Guide

TV-IP321PI

© Copyright 2015 TRENDnet. All Rights Reserved.

33

Live View Settings

Setup the live view video quality, file size and file saving directories.

Live View Parameters

Live View

Buffer:

Configure  the  buffer  size  for  live  view  video  stream.
With  low  buffer  size  setting,  you  can  get  real-time
video stream, but the video may be stop and go if the
network  is  congested.  With  high  buffer  setting,  you
can  have  smooth  video  streaming,  but  the  video  is
delayed  from  the  time  happening.  Medium  size  can
have  moderate  video  stream  smoothness  and  time
delay.

Record File Settings

Record file

size:

This size of live view video recording. You can
choose 256MB, 512MB, or 1GB a file. Smaller file
size is good for many short recordings.

Save record

files to:

By default, files will be saved under the folder with
your user name, under the subdirectory
TRENDnet/RecordFiles. Click

Browse

and then

choose a new destination if you want to save the
file somewhere else.

Save

downloaded

files to:

By default, files will be saved under the folder with
your user name, under the subdirectory
TRENDnet/DownloadFiles. Click

Browse

and then

choose a new destination if you want to save the
file somewhere else.

Picture and Clip Settings

Save

snapshots in

live view to:

By default, files will be saved under the folder with
your user name, under the subdirectory
TRENDnet/SnapshotFiles. Click

Browse

and then

choose a new destination if you want to save the
file somewhere else.

Save

snapshots

when

playback to:

By default, files will be saved under the folder with
your user name, under the subdirectory
TRENDnet/PlaybackPics. Click

Browse

and then

choose a new destination if you want to save the
file somewhere else.

Save clips to:

By default, files will be saved under the folder with
your user name, under the subdirectory
TRENDnet/PlaybackFiles. Click

Browse

and then

choose a new destination if you want to save the
file somewhere else.

Click

Save

to save the changes

«
...
31
32
33
34
35
...
»

Summary of Contents for TV-IP321PI
































































Reviews:

No comments