TRENDnet TV-IP321PI User Manual Download Page 34 | Manualshive

Page: 34 / 63

TRENDnet TV-IP321PI User Manual Download Page 34

TRENDnet User’s Guide

TV-IP321PI

© Copyright 2015 TRENDnet. All Rights Reserved.

34

Maintenance

You can restart, load camera settings and upgrade the camera firmware
on this page

.

Reboot

Reboot:

Click this button to reboot this camera.

Reset

Reset:

Reset all camera parameters, except the IP
parameters and user information.

Default:

Load complete factory default to the camera.

Import Config. File

Config File:

To load previously saved settings, click

Browse

to

find the configuration file and then click

Import

.

Status:

Shows the status in loading configuration file.

Export Config. File

Export:

Click Export to download configuration file. The file
will be downloaded to the Download folder by default.

Remote Upgrade

Firmware:

Click Browse to find the latest firmware and then click
Upgrade.

Status:

Shows the status in firmware upgrade.

TRENDnet  may  periodically  release  firmware  upgrades  that  might  add
features  or  fix  problems  associated  with  your  TRENDnet  model  and
version.  To  find  out  if  there  is  a  firmware  upgrade  available  for  your
device, please check your TRENDnet model and version using the link.

http://www.trendnet.com/downloads/

1.

If a firmware upgrade is available, download the firmware to
your computer.

2.

Unzip the file to a folder on your computer.

3.

Read the firmware upgrade instruction for specific version
update information.

4.

Log into the TV-IP321PI.

5.

Getting to this Maintenance page to upgrade firmware.

«
...
32
33
34
35
36
...
»

Summary of Contents for TV-IP321PI
































































Reviews:

No comments