English
4
8.
Take a utility knife and cut along
the middle to split the cable into
two strands.
10.
Run the Internet Camera Server's
power adapter and RJ-45
Ethernet cable from the base to
the top of the mounting arm.
Make sure the end of the RJ-45
Ethernet cable that is run through
the top of the TV-H110 is
unterminated.
9.
Use a wire stripper to remove the
insulation to expose the copper
wiring.
11.
Run the TV-H110's power jumper
cable from the top to the base of
the camera housing.
12.
Connect the power jumper cable
to the TV-H110's power adapter.
