background image

14

  Limited Warranty

TRENDnet warrants its products against defects in material and workmanship, under normal 
use and service, for the following lengths of time from the date of purchase.  

TV-H110– 2 Year Limited Warranty

If a product does not operate as warranted above during the applicable warranty period, 
TRENDnet shall, at its option and expense, repair the defective product or part, deliver to 
customer an equivalent product or part to replace the defective item, or refund to customer 
the purchase price paid for the defective product.  All products that are replaced will become 
the property of TRENDnet.  Replacement products may be new or reconditioned.

TRENDnet shall not be responsible for any software, firmware, information, or memory data 
of customer contained in, stored on, or integrated with any products returned to TRENDnet 
pursuant to any warranty.

There are no user serviceable parts inside the product.  Do not remove or attempt to service 
the product by any unauthorized service center.  This warranty is voided if (i) the product has 
been modified or repaired by any unauthorized service center, (ii) the product was subject to 
accident, abuse, or improper use (iii) the product was subject to conditions more severe than 
those specified in the manual.

Warranty  service  may  be  obtained  by  contacting  TRENDnet  office  within  the  applicable 
warranty period for a Return Material Authorization (RMA) number, accompanied by a copy 
of the dated proof of the purchase.  Products returned to TRENDnet must be pre-authorized 
by TRENDnet with RMA number marked on the outside of the package, and sent prepaid, 
insured and packaged appropriately for safe shipment.  

WARRANTIES EXCLUSIVE

: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS 

WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S 
OPTION,  REPAIR  OR  REPLACEMENT.  THE  FOREGOING  WARRANTIES  AND 
REMEDIES  ARE  EXCLUSIVE  AND  ARE  IN  LIEU  OF  ALL  OTHER  WARRANTIES, 
EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY 
OR  OTHERWISE,  INCLUDING  WARRANTIES  OF  MERCHANTABILITY AND  FITNESS 
FOR A PARTICULAR PURPOSE. TRENDNET NEITHER ASSUMES NOR AUTHORIZES 
ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION 
WITH  THE  SALE,  INSTALLATION  MAINTENANCE  OR  USE  OF  TRENDNET'S 
PRODUCTS.

TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND 
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT 
EXIST  OR  WAS  CAUSED  BY  CUSTOMER'S  OR  ANY  THIRD  PERSON'S  MISUSE, 
NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO 
REPAIR  OR  MODIFY,  OR  ANY  OTHER  CAUSE  BEYOND  THE  RANGE  OF  THE 
INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.

Summary of Contents for TV-H110




















Reviews: