background image

TRENDnet User’s Guide 

 

TPL-4052E 

 

© Copyright 2015 TRENDnet. All Rights Reserved. 

 

31

 

Limited Warranty 

TRENDnet warrants its products against defects in  material and workmanship, 
under normal use and service, for the following lengths of time from the date of 
purchase. 

• 

TPL-4052E – 3 Years Warranty 

If a product does not operate as warranted during the applicable warranty period, 
TRENDnet shall reserve the right, at its expense, to repair or replace the defective 
product or part and deliver an equivalent product or part to the customer. The 
repair/replacement unit’s warranty continues from the original date of purchase. 
All products that are replaced become the property of TRENDnet. Replacement 
products  may  be  new  or  reconditioned.  TRENDnet  does  not  issue  refunds  or 
credit. Please contact the point-of purchase for their return policies. 

TRENDnet shall not be responsible for any software, firmware, information, or 
memory  data  of  customer  contained  in,  stored  on,  or  integrated  with  any 
products returned to TRENDnet pursuant to any warranty

.

 

There are no user serviceable parts inside the product. Do not remove or attempt 
to  service  the  product  by  any  unauthorized  service  center.  This  warranty  is 
voided  if  (i)  the  product  has  been  modified  or  repaired  by  any  unauthorized 
service center, (ii) the product was subject to accident, abuse, or improper use 
(iii) the product was subject to conditions more severe than those specified in the 
manual. 

Warranty service may be obtained by contacting TRENDnet within the applicable 
warranty period and providing a copy of the dated proof of the purchase

.

 Upon 

proper submission of required documentation a Return Material Authorization 
(RMA)  number  will  be  issued.  An  RMA  number  is  required  in  order  to  initiate 
warranty service support for all TRENDnet products. Products that are sent to 
TRENDnet for RMA service must have the RMA number marked on the outside of 
return  packages  and  sent  to  TRENDnet  prepaid,  insured  and  packaged 
appropriately for safe shipment. Customers shipping from outside of the USA and 
Canada  are  responsible  for  return  shipping  fees.  Customers  shipping  from 
outside of the USA are responsible for custom charges, including but not limited 
to, duty, tax, and other fees. 

WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE 
AS  WARRANTED  ABOVE,  THE  CUSTOMER’S  SOLE  REMEDY  SHALL  BE,  AT 
TRENDNET’S  OPTION,  REPAIR  OR  REPLACE.  THE  FOREGOING  WARRANTIES 
AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, 

EXPRESSED  OR  IMPLIED,  EITHER  IN  FACT  OR  BY  OPERATION  OF  LAW, 
STATUTORY 

OR 

OTHERWISE, 

INCLUDING 

WARRANTIES 

OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. 

TRENDNET  NEITHER  ASSUMES  NOR  AUTHORIZES  ANY  OTHER  PERSON  TO 
ASSUME  FOR  IT  ANY  OTHER  LIABILITY  IN  CONNECTION  WITH  THE  SALE, 
INSTALLATION MAINTENANCE OR USE OF TRENDNET’S PRODUCTS. 

TRENDNET  SHALL  NOT  BE  LIABLE  UNDER  THIS  WARRANTY  IF  ITS  TESTING 
AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT 
DOES NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S 
MISUSE,  NEGLECT,  IMPROPER  INSTALLATION  OR  TESTING,  UNAUTHORIZED 
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE 
OF  THE  INTENDED  USE,  OR  BY  ACCIDENT,  FIRE,  LIGHTNING,  OR  OTHER 
HAZARD. 

LIMITATION  OF  LIABILITY:  TO  THE  FULL  EXTENT  ALLOWED  BY  LAW 
TRENDNET ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, 
WHETHER  BASED  IN  CONTRACT  OR  TORT  (INCLUDING  NEGLIGENCE),  FOR 
INCIDENTAL,  CONSEQUENTIAL,  INDIRECT,  SPECIAL,  OR  PUNITIVE  DAMAGES 
OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS 
OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR 
IN  CONNECTION  WITH  THE  SALE,  INSTALLATION,  MAINTENANCE,  USE, 
PERFORMANCE,  FAILURE,  OR  INTERRUPTION  OF  THE  POSSIBILITY  OF  SUCH 
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND 
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF 
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED 
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE. 

Governing Law: This Limited Warranty shall be governed by the laws of the state 
of California. 

Some  TRENDnet  products  include  software  code  written  by  third  party 
developers. These codes are subject to the GNU General Public License (“GPL”) or 
GNU Lesser General Public License (“LGPL”). 

Go  to  http://www.trendnet.com/gpl  or  http://www.trendnet.com  Download 
section and look for the desired TRENDnet product to access to the GPL Code or 
LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject 
to  the  copyrights  of  the  developers.  TRENDnet  does  not  provide  technical 
support  for  these  codes.  Please  go  to  http://www.gnu.org/licenses/gpl.txt  or 
http://www.gnu.org/licenses/lgpl.txt for specific terms of each license. 

February 6, 2015 

TPL-4052E/TPL-4052E2K User’s Guide V1.3 

Summary of Contents for TPL-4052E

































Reviews: