TRENDnet TEW-841APBO, User Manual

Page: 33 / 57

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-841APBO
30
Network
Basic
Network > Basic
This page allows configuration of the access point’s IPv4, IPv6, and Spanning Tree
Protocol settings.
1. Log into your access point management page (see “ Access your access point
management page ” on page 27).
2. Click on Basic under Network from the left side menu. Please note, when clicking
Save, the settings are saved but not applied yet.
IPv4 Settings

IP Network Setting – Select either DHCP or Static IP. Default: DHCP

IP Address – Enter the desired IPv4 address if above setting is set to static IP.

Subnet Mask – Enter the desired IPv4 subnet mask.

Gateway – Enter the desired IPv4 Gateway.

Primary DNS – Enter the desired primary Domain Name Server (DNS).

Secondary DNS – Enter the desired secondary Domain Name Server (DNS).
IPv6 Settings

Link-local Address – Check the box to enable IPv6 Link-local Address setting.

IP Address – Enter the desired IPv6 address.

Subnet Prefix Length – Enter the desired IPv6 subnet prefix length.

Gateway – Enter the desired IPv6 Gateway.

Primary DNS – Enter the desired primary Domain Name Server (DNS).

Secondary DNS – Enter the desired secondary Domain Name Server (DNS).
Spanning Tree Protocol (STP) Settings

Status – Select either to Enable or Disable STP. Default: Disabled

Hello Time – Enter the desired hello time (in seconds)

Max Age – Enter the desired max age (in seconds).

Forward Delay – Enter the desired forward delay (in seconds).

Priority – Enter the desired priority of this STP configuration.