TRENDnet TEW-841APBO, User Manual

Page: 31 / 57

© Copyright 2019 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-841APBO
28
LAN Information IPv6

IP Address – Displays the IPv6 address assigned to the access point. This can be
modified under the Network > Basic section.

Link-Local Address – Displays the current Link-Local address and prefix length
assigned to your access point.

Gateway – Displays the current gateway address assigned to your access point.

Primary DNS – Displays the primary Domain Name Server (DNS) assigned to
your access point.

Secondary DNS – Displays the secondary Domain Name Server (DNS) assigned
to your access point.
Wireless LAN Information – 2.4GHz

Operation Mode – Displays the operation mode that the access point is
currently set.

Wireless Mode – Displays the IEEE 802.11 protocol the access point’s wireless
radio is broadcasting on.

Channel Bandwidth – Displays the bandwidth (in MHz) that the access point’s
radio is using

Channel – Displays the channel that the 2.4GHz radio is using.

Distance – Displays the distance (coverage/radius) in meters that the access
point is to cover.
Wireless LAN Information – 5GHz

Operation Mode – Displays the operation mode that the access point is
currently set.

Wireless Mode – Displays the IEEE 802.11 protocol the access point’s wireless
radio is broadcasting on.

Channel Bandwidth – Displays the bandwidth (in MHz) that the access point’s
radio is using

Channel – Displays the channel that the 5GHz radio is using.

Distance – Displays the distance (coverage/radius) in meters that the access
point is to cover.
Statistics

Profile – Displays the wireless profile number.

SSID – Displays the SSID name of the profile.

Security – Displays the type of security configured for the profile.

VID – Displays the VID assigned to this profile.

802.1Q – Displays the status of 802.1Q.

RX(Packets) – Displays the data usage when receiving data (in Bytes) and
number of packets.

TX(Packets) – Displays the data usage when transmitting data (in Bytes) and
number of packets.
3. Click Refresh at the bottom of the page to refresh the page.