© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW752DRU
49
Access > Protocol / IP Filter
This window is used to configure the IP filter rules used by the Router.
Add Inbound Filter Rule
Name: Enter the name of the inbound filter rule.
Action: Select to Allow or Deny this rule.
Enable: Tick the check box of the corresponding entry to enable the rule.
Remote Start IP Address: Enter the starting remote IP address.
Remote End IP Address: Enter the ending remote IP address.
Click the Add button to add or modify the rule.
Click the Cancel button to discard the changes made.
Inbound Filter Rules List
This section displays a list of configured inbound filter rules.
Click the
button box of the corresponding entry to modify the entry. Click the
button of the corresponding entry to remove the entry.
