© Copyright 2015 TRENDnet. All Rights Reserved.
38
TRENDnet User’s Guide
TEW-734APO
System Setting
This page displays thin access points connected in the network.
1. Log into the management page (see “
” on page 9).
2. Click on Management and
System Settings
.
Device Settings
Device Mode:
Select the mode you would want the access point to operate on.
Connect Mode:
Select the mode the access controller will be connected
Device Name:
Enter the name of the device
Spanning Tree:
Select to enable Spanning Tree feature
STP Forward Delay:
Enter the delay time duration
Enable VLAN
Enable 802.1Q VLAN:
Select to enable VLAN feature
VLAN ID:
Enter the assigned VLAN ID of the access controller
IP Address
DHCP Client:
Select to have access controller to receive IP address from your
DHCP server
Static:
Select this option to manually configure the access point’s IP address.
o
IP Address:
Enter the IP address to assign
o
Subnet Mask:
Enter the subnet mask of the access point
o
Gateway IP Address:
Enter the gateway IP address
o
DNS1-2:
Enter the DNS IP address to assign on the access point.
DHCP Server
DHCP Client:
Select to enable DHCP server
o
DHCP IP Address Range:
Enter the DHCP IP range to assign
o
Subnet Mask:
Enter the Subnet mask to assign DHCP clients
o
Lease Time:
Enter the lease time duration for DHCP clients.
Summary of Contents for TEW-734APO
Page 1: ...TRENDnet User s Guide Cover Page...
Page 65: ......
