TRENDnet TEG-S2400I - DATA SHEETS, User Manual, Page: 91 / 149

- 91 -
4.2.6. Port Mirror Configuration
The port mirroring is a method for monitor traffic in switched networks. Traffic through ports can be
monitored by one specific port. That is traffic goes in or out monitored ports will be duplicated into
monitoring port.
Actions->
Press Space key to change configure of per item.
1. Select <Edit> .
2. Sniffer Mode: Press Space key to set sniffer mode Disable
、
Rx
、
Tx or Both.
3. Monitoring Port: It means sniffer port can be used to see all monitors port traffic. Press Space
key to choose it.
4. Monitored Port: The ports you want to monitor. All monitor port traffic will be copied to sniffer
port. You can select max 25 monitor ports in the switch. User can choose which port to monitor in
only one sniffer mode. Press Space key to choose member port, “V” – is the member, “—“ – not
the member.
5.
P
ress Ctrl+A go back action menu line
6. Select <Save> to save all configure value.
7. On the action menu line you can press <Next Page> to configure port9 ~ port26, press <Previous
Page> return to last page.
NOTE: Only has one sniffer mode in switch at the same time.